Humidity Test Chambers - Temperature and Humidity Chambers

The G-Series Elite Line of Portable Test Chambers
Stock to 4 Week Deliveries with over 100 Models!

NEW-IEC 60068 COMPLIANT
NEW-HIGH TEMP TO +260C


Russells G-Series Elite portable temperature and temperature and humidity test chambers give you the features and accessories you need to keep your temperature and humidity lab tests running smoothly. These mobile systems are equipped with all the features you need from the start. There are no extra hidden costs for these features like you would find from other vendors. These features include microprocessor instrumentation, failsafe temperature protection, and humidity water demineralizer, as well as window, gauges, port, casters, system status indicators, and more. These Elite features would normally cost substantiallly more, if they are available at all. Our Elite test chambers are even more attractive when you view their designed-in performance advantages including:
  • More heating, cooling and air flow capacity than competitive models bring you to temperature quickly and with better uniformity
  • Responsive expansion valve and bypass refrigerant control put all of the refrigeration horsepower to work for you
  • Maintenance is simplified with full three sided access to base mounted system components
  • All models available with cryogenic cooling
  • CE Certification on most Elite Models








Note: The number used for each Elite Chamber model is the chamber volume in cubic feet.

The G-8 Elite - The G-16 Elite - The G-32-Elite - The G-64 Elite

A Russells application engineer can assist you in selecting the temperature/humidity test chamber configuration, options, and size that's best for you, custom designed to your exact specifications.

Portable Temperature and Temperature and Humidity Climate Chambers
Additionally, Russells has achieved UL 508A certification for industrial control panels on all of its pre-engineered Elite G-Series humidity/temperature and temperature chambers. This also includes all Elite G-Series PCU units. This certification was issued on 2/19/07 on report #3110004CLE-002 from Intertek Testing Services Inc.


Standard Climate Chamber Features:
    Cabinet

  • Continuous TIG welded 304 stainless chamber liner for leak free service.
  • Non-settling oven grade fiberglass insulation, 0.25 K factor.
  • Chamber drain, all models not just humidity.
  • Welded structural base frame with removable service panel on three sides.
  • Dual silicone one piece door gaskets with mitered and vulcanized corners.
  • Multipane tempered viewing window (with wiper on GD models).
  • Durable blue powder coated exterior finish.
  • One three inch (3 ") access port.
  • Heavy duty casters.

  • Electrical

  • UL 508A compliant control panel
  • All wiring meets NEC standards
  • System branch circuits individually fused.
  • 115 volt control circuitry.
  • Full system function switches and indicator lights.
  • System fault status indicators.
  • All wiring color coded and labeled.
  • High temperature failsafe limit.
    Refrigeration

  • Zero ozone depletion refrigerants.
  • Cryogenic models available
  • Copper tube/aluminum fin cooling coil.
  • Air/Water cooled condensers available.
  • Air cooled desuperheater (cascade models) and oil separator.
  • High efficiency brazed plate cascade heat exchanger.
  • Non-bucking automatic heat/cool mode selection with compressor time-out.
  • Dual high/low refrigeration pressure limit switches.
  • Inherent compressor overload protection.
  • Refrigeration service manifolds with gauges.

  • Humidity

  • Quick response vapor generator with replaceable inconel sheath immersion heater.
  • Vapor generator failsafe overtemp protection.
  • Humidity water demineralizer.


  • Controls

  • Watlow microprocessor programming controller.
  • Self prompting operation with 256 programable segments.
  • Watlow failsafe product safeguard test item temperature limit.
  • RS-232 Interface.
Optional Accessories:
    Chamber

  • Additional access ports.
  • Shelves.
  • 208 or 460 volts power input.
  • Main power disconnect switch.
  • Running time meter.
  • Boost cooling system, LN2 or CO2
  • Humidity water reservoir.
  • Dry air or nitrogen purge.
  • R.H. hinged door.
  • Master heating circuit contactor.
  • Auto restart timer.
  • Balanced load on 3 phase power.
    Controls

  • RS-422/423 data interface with communications software.
  • Programmer on/off event relays.
  • Chart recorders.
  • Watview software.
Request-A-Quote - Portable, Mobile Temperature / Humidity Test Chambers